Vessel#

class SpaceCenter.Vessel#

These objects are used to interact with vessels in KSP. This includes getting orbital and flight data, manipulating control inputs and managing resources. Created using SpaceCenter.active_vessel or SpaceCenter.vessels.

name: string#

The name of the vessel.

Attribute:: Can be read or written
Return type:: string

type: SpaceCenter.VesselType#

The type of the vessel.

Attribute:: Can be read or written
Return type:: SpaceCenter.VesselType

situation: SpaceCenter.VesselSituation#

The situation the vessel is in.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.VesselSituation

loaded: boolean#

Whether the vessel is loaded, i.e. its parts are instantiated in the scene because it is within loading range of the active vessel. A vessel that is not loaded exists only as orbital data and is always on-rails (see SpaceCenter.Vessel.packed).

Attribute:: Read-only, cannot be set
Return type:: boolean

packed: boolean#

Whether the vessel is packed (on-rails). A packed vessel has its physics simulation suspended and follows its orbit analytically. A vessel that is not loaded (see SpaceCenter.Vessel.loaded) is always packed.

Attribute:: Read-only, cannot be set
Return type:: boolean

physics_range: number#

The distance from the active vessel, in meters, out to which this vessel keeps running its physics simulation — and so stays controllable, able to burn its engines and respond to its autopilot. Setting this raises the vessel out of the stock physics bubble, so that it keeps flying while the active vessel is far away. Set to zero to restore the game’s default range.

Attribute:: Can be read or written
Return type:: number

Note

This always reports the vessel’s live range, so reading it when no range has been set gives the game’s default for the vessel’s current SpaceCenter.Vessel.situation — which is much shorter than the distance at which the vessel unloads. In orbit a vessel is put on rails just 350m away, long before it unloads at 2.5km, and a vessel on rails produces no thrust and ignores control input even though it is still loaded.

There is a 10% margin below the range, so that a vessel hovering at the threshold does not repeatedly drop out of the simulation and rejoin it. The vessel leaves the simulation at the distance set here, and rejoins it at 90% of that distance; in between it keeps whichever state it is already in.

The requested range applies in every situation. The game’s own defaults are not uniform — a vessel flying in atmosphere stays loaded out to 22.5km — so setting a small range can shorten the range such a vessel would otherwise have had.

A range lasts until it is set back to zero or the game is exited. Unlike most state a client sets, it is not released when that client disconnects, because dropping a distant vessel back to the default range would put it on-rails part way through a maneuver.

Holding a vessel off-rails a long way from the active vessel costs performance, and accumulates positional error that can destroy it. Raise the range on the vessels that need it, by as little as they need.

recoverable: boolean#

Whether the vessel is recoverable.

Attribute:: Read-only, cannot be set
Return type:: boolean

recover()#: Recover the vessel.

met: number#

The mission elapsed time in seconds.

Attribute:: Read-only, cannot be set
Return type:: number

biome: string#

The name of the biome the vessel is currently in.

Attribute:: Read-only, cannot be set
Return type:: string

flight([reference_frame = None])#

Returns a SpaceCenter.Vessel.flight() object that can be used to get flight telemetry for the vessel, in the specified reference frame.

Parameters:: reference_frame (SpaceCenter.ReferenceFrame) – Reference frame. Defaults to the vessel’s surface reference frame (SpaceCenter.Vessel.surface_reference_frame).
Return type:: SpaceCenter.Flight

Note

When this is called with no arguments, the vessel’s surface reference frame is used. This reference frame moves with the vessel, therefore velocities and speeds returned by the flight object will be zero. See the reference frames tutorial for examples of getting the orbital and surface speeds of a vessel.

orbit: SpaceCenter.Orbit#

The current orbit of the vessel.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.Orbit

control: SpaceCenter.Control#

Returns a SpaceCenter.Vessel.control object that can be used to manipulate the vessel’s control inputs. For example, its pitch/yaw/roll controls, RCS and thrust.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.Control

comms: SpaceCenter.Comms#

Returns a SpaceCenter.Vessel.comms object that can be used to interact with CommNet for this vessel.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.Comms

auto_pilot: SpaceCenter.AutoPilot#

An SpaceCenter.Vessel.auto_pilot object, that can be used to perform simple auto-piloting of the vessel.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.AutoPilot

crew_capacity: number#

The number of crew that can occupy the vessel.

Attribute:: Read-only, cannot be set
Return type:: number

crew_count: number#

The number of crew that are occupying the vessel.

Attribute:: Read-only, cannot be set
Return type:: number

crew: List#

The crew in the vessel.

Attribute:: Read-only, cannot be set
Return type:: List

resources: SpaceCenter.Resources#

A SpaceCenter.Vessel.resources object, that can used to get information about resources stored in the vessel.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.Resources

resources_in_decouple_stage(stage[, cumulative = True])#

Warning

Deprecated. Use SpaceCenter.Stage.resources() from the object returned by SpaceCenter.Vessel.decouple_stage_at() instead.

Returns a SpaceCenter.Vessel.resources object, that can used to get information about resources stored in a given stage.

Parameters:

stage (number) – Get resources for parts that are decoupled in this stage.
cumulative (boolean) – When False, returns the resources for parts decoupled in just the given stage. When True returns the resources decoupled in the given stage and all subsequent stages combined.

Return type:

SpaceCenter.Resources

Note

Deprecated. Use SpaceCenter.Vessel.decouple_stage_at() and SpaceCenter.Stage.resources() instead. For details on stage numbering, see the discussion on Staging.

stages: List#

Activation (burn) stages for this vessel, in ascending stage order. This does not include the -1 stage (parts with no staging icon), as it carries no delta-v; use SpaceCenter.Vessel.stage_at() with -1 to get those parts.

Attribute:: Read-only, cannot be set
Return type:: List

Note

Lists activation stages only (decouple is false). See also Staging.

stage_at(stage)#

The activation stage with the given number. Pass -1 to get the parts that are never activated (those with no staging icon).

Parameters:: stage (number) – Get activation stage at this index.
Return type:: SpaceCenter.Stage

decouple_stages: List#

Decouple stages for this vessel, in ascending stage order. The -1 stage, containing the parts that are never decoupled and remain on the vessel, is included first when any such parts exist.

Attribute:: Read-only, cannot be set
Return type:: List

Note

Lists decouple stages only. Delta-v is not defined on these stages.

decouple_stage_at(stage)#

The decouple stage with the given number. Pass -1 to get the parts that are never decoupled and remain on the vessel after all stages have fired.

Parameters:: stage (number) – Get decouple stage at this index.
Return type:: SpaceCenter.Stage

delta_v: number#

Total delta-v for the vessel in the current situation, in m/s.

Attribute:: Read-only, cannot be set
Return type:: number

Note

Requires the stock delta-v display to be ready. Units are meters per second.

vacuum_delta_v: number#

Total vacuum delta-v for the vessel, in m/s.

Attribute:: Read-only, cannot be set
Return type:: number

sea_level_delta_v: number#

Total sea-level delta-v for the vessel, in m/s.

Attribute:: Read-only, cannot be set
Return type:: number

burn_time: number#

Total burn time for the vessel, in seconds.

Attribute:: Read-only, cannot be set
Return type:: number

parts: SpaceCenter.Parts#

A SpaceCenter.Parts object, that can used to interact with the parts that make up this vessel.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.Parts

mass: number#

The total mass of the vessel, including resources, in kg.

Attribute:: Read-only, cannot be set
Return type:: number

dry_mass: number#

The total mass of the vessel, excluding resources, in kg.

Attribute:: Read-only, cannot be set
Return type:: number

thrust: number#

The total thrust currently being produced by the vessel’s engines, in Newtons. This is computed by summing SpaceCenter.Engine.thrust for every engine in the vessel.

Attribute:: Read-only, cannot be set
Return type:: number

available_thrust: number#

Gets the total available thrust that can be produced by the vessel’s active engines, in Newtons. This is computed by summing SpaceCenter.Engine.available_thrust for every active engine in the vessel.

Attribute:: Read-only, cannot be set
Return type:: number

available_thrust_at(pressure)#

Gets the total available thrust that can be produced by the vessel’s active engines, in Newtons. This is computed by summing SpaceCenter.Engine.available_thrust_at() for every active engine in the vessel. Takes the given pressure into account.

Parameters:: pressure (number) – Atmospheric pressure in atmospheres
Return type:: number

max_thrust: number#

The total maximum thrust that can be produced by the vessel’s active engines, in Newtons. This is computed by summing SpaceCenter.Engine.max_thrust for every active engine.

Attribute:: Read-only, cannot be set
Return type:: number

max_thrust_at(pressure)#

The total maximum thrust that can be produced by the vessel’s active engines, in Newtons. This is computed by summing SpaceCenter.Engine.max_thrust_at() for every active engine. Takes the given pressure into account.

Parameters:: pressure (number) – Atmospheric pressure in atmospheres
Return type:: number

max_vacuum_thrust: number#

The total maximum thrust that can be produced by the vessel’s active engines when the vessel is in a vacuum, in Newtons. This is computed by summing SpaceCenter.Engine.max_vacuum_thrust for every active engine.

Attribute:: Read-only, cannot be set
Return type:: number

acceleration: number#

The acceleration currently produced by the vessel’s engines, in \(m/s^2\). This is SpaceCenter.Vessel.thrust divided by the vessel’s SpaceCenter.Vessel.mass.

Attribute:: Read-only, cannot be set
Return type:: number

available_acceleration: number#

The total available acceleration that can be produced by the vessel’s active engines, in \(m/s^2\). This is SpaceCenter.Vessel.available_thrust divided by the vessel’s SpaceCenter.Vessel.mass.

Attribute:: Read-only, cannot be set
Return type:: number

available_acceleration_at(pressure)#

The total available acceleration that can be produced by the vessel’s active engines, in \(m/s^2\). This is SpaceCenter.Vessel.available_thrust_at() divided by the vessel’s SpaceCenter.Vessel.mass. Takes the given pressure into account.

Parameters:: pressure (number) – Atmospheric pressure in atmospheres
Return type:: number

max_acceleration: number#

The total maximum acceleration that can be produced by the vessel’s active engines, in \(m/s^2\). This is SpaceCenter.Vessel.max_thrust divided by the vessel’s SpaceCenter.Vessel.mass.

Attribute:: Read-only, cannot be set
Return type:: number

max_acceleration_at(pressure)#

The total maximum acceleration that can be produced by the vessel’s active engines, in \(m/s^2\). This is SpaceCenter.Vessel.max_thrust_at() divided by the vessel’s SpaceCenter.Vessel.mass. Takes the given pressure into account.

Parameters:: pressure (number) – Atmospheric pressure in atmospheres
Return type:: number

max_vacuum_acceleration: number#

The total maximum acceleration that can be produced by the vessel’s active engines when the vessel is in a vacuum, in \(m/s^2\). This is SpaceCenter.Vessel.max_vacuum_thrust divided by the vessel’s SpaceCenter.Vessel.mass.

Attribute:: Read-only, cannot be set
Return type:: number

specific_impulse: number#

The combined specific impulse of all active engines, in seconds. This is computed using the formula described here.

Attribute:: Read-only, cannot be set
Return type:: number

specific_impulse_at(pressure)#

The combined specific impulse of all active engines, in seconds. This is computed using the formula described here. Takes the given pressure into account.

Parameters:: pressure (number) – Atmospheric pressure in atmospheres
Return type:: number

vacuum_specific_impulse: number#

The combined vacuum specific impulse of all active engines, in seconds. This is computed using the formula described here.

Attribute:: Read-only, cannot be set
Return type:: number

kerbin_sea_level_specific_impulse: number#

The combined specific impulse of all active engines at sea level on Kerbin, in seconds. This is computed using the formula described here.

Attribute:: Read-only, cannot be set
Return type:: number

moment_of_inertia: Tuple#

The moment of inertia of the vessel around its center of mass in \(kg.m^2\). The inertia values in the returned 3-tuple are around the pitch, roll and yaw directions respectively. This corresponds to the vessels reference frame (SpaceCenter.Vessel.reference_frame).

Attribute:: Read-only, cannot be set
Return type:: Tuple

inertia_tensor: List#

The inertia tensor of the vessel around its center of mass, in the vessels reference frame (SpaceCenter.Vessel.reference_frame). Returns the 3x3 matrix as a list of elements, in row-major order.

Attribute:: Read-only, cannot be set
Return type:: List

available_torque: Tuple#

The maximum torque that the vessel generates. Includes contributions from reaction wheels, RCS, gimballed engines and aerodynamic control surfaces. Returns the torques in \(N.m\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_reaction_wheel_torque: Tuple#

The maximum torque that the currently active and powered reaction wheels can generate. Returns the torques in \(N.m\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_rcs_torque: Tuple#

The maximum torque that the currently active RCS thrusters can generate. Returns the torques in \(N.m\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_rcs_force: Tuple#

The maximum force that the currently active RCS thrusters can generate. Returns the forces in \(N\) along each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the right, forward and bottom directions of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_rcs_acceleration: Tuple#

The maximum acceleration that the currently active RCS thrusters can generate. This is SpaceCenter.Vessel.available_rcs_force divided by the vessel’s SpaceCenter.Vessel.mass. Returns the accelerations in \(m/s^2\) along each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the right, forward and bottom directions of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_engine_torque: Tuple#

The maximum torque that the currently active and gimballed engines can generate. Returns the torques in \(N.m\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_control_surface_torque: Tuple#

The maximum torque that the aerodynamic control surfaces can generate. Returns the torques in \(N.m\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_other_torque: Tuple#

The maximum torque that parts (excluding reaction wheels, gimballed engines, RCS and control surfaces) can generate. Returns the torques in \(N.m\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_angular_acceleration: Tuple#

The maximum angular acceleration that the vessel can generate. Includes contributions from reaction wheels, RCS, gimballed engines and aerodynamic control surfaces. This is SpaceCenter.Vessel.available_torque divided by the vessel’s SpaceCenter.Vessel.moment_of_inertia. Returns the angular accelerations in \(rad/s^2\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_reaction_wheel_angular_acceleration: Tuple#

The maximum angular acceleration that the currently active and powered reaction wheels can generate. This is SpaceCenter.Vessel.available_reaction_wheel_torque divided by the vessel’s SpaceCenter.Vessel.moment_of_inertia. Returns the angular accelerations in \(rad/s^2\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_rcs_angular_acceleration: Tuple#

The maximum angular acceleration that the currently active RCS thrusters can generate. This is SpaceCenter.Vessel.available_rcs_torque divided by the vessel’s SpaceCenter.Vessel.moment_of_inertia. Returns the angular accelerations in \(rad/s^2\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_engine_angular_acceleration: Tuple#

The maximum angular acceleration that the currently active and gimballed engines can generate. This is SpaceCenter.Vessel.available_engine_torque divided by the vessel’s SpaceCenter.Vessel.moment_of_inertia. Returns the angular accelerations in \(rad/s^2\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_control_surface_angular_acceleration: Tuple#

The maximum angular acceleration that the aerodynamic control surfaces can generate. This is SpaceCenter.Vessel.available_control_surface_torque divided by the vessel’s SpaceCenter.Vessel.moment_of_inertia. Returns the angular accelerations in \(rad/s^2\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

available_other_angular_acceleration: Tuple#

The maximum angular acceleration that parts (excluding reaction wheels, gimballed engines, RCS and control surfaces) can generate. This is SpaceCenter.Vessel.available_other_torque divided by the vessel’s SpaceCenter.Vessel.moment_of_inertia. Returns the angular accelerations in \(rad/s^2\) around each of the coordinate axes of the vessels reference frame (SpaceCenter.Vessel.reference_frame). These axes are equivalent to the pitch, roll and yaw axes of the vessel.

Attribute:: Read-only, cannot be set
Return type:: Tuple

reference_frame: SpaceCenter.ReferenceFrame#

The reference frame that is fixed relative to the vessel, and orientated with the vessel.

The origin is at the center of mass of the vessel.
The axes rotate with the vessel.
The x-axis points out to the right of the vessel.
The y-axis points in the forward direction of the vessel.
The z-axis points out of the bottom off the vessel.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.ReferenceFrame

../../../_images/vessel-aircraft.png — Vessel reference frame origin and axes for the Aeris 3A aircraft#

../../../_images/vessel-rocket.png — Vessel reference frame origin and axes for the Kerbal-X rocket#

orbital_reference_frame: SpaceCenter.ReferenceFrame#

The reference frame that is fixed relative to the vessel, and orientated with the vessels orbital prograde/normal/radial directions.

The origin is at the center of mass of the vessel.
The axes rotate with the orbital prograde/normal/radial directions.
The x-axis points in the orbital anti-radial direction.
The y-axis points in the orbital prograde direction.
The z-axis points in the orbital normal direction.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.ReferenceFrame

Note

Be careful not to confuse this with ‘orbit’ mode on the navball.

../../../_images/vessel-orbital.png — Vessel orbital reference frame origin and axes#

surface_reference_frame: SpaceCenter.ReferenceFrame#

The reference frame that is fixed relative to the vessel, and orientated with the surface of the body being orbited.

The origin is at the center of mass of the vessel.
The axes rotate with the north and up directions on the surface of the body.
The x-axis points in the zenith direction (upwards, normal to the body being orbited, from the center of the body towards the center of mass of the vessel).
The y-axis points northwards towards the astronomical horizon (north, and tangential to the surface of the body – the direction in which a compass would point when on the surface).
The z-axis points eastwards towards the astronomical horizon (east, and tangential to the surface of the body – east on a compass when on the surface).

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.ReferenceFrame

Note

Be careful not to confuse this with ‘surface’ mode on the navball.

../../../_images/vessel-surface.png — Vessel surface reference frame origin and axes#

surface_velocity_reference_frame: SpaceCenter.ReferenceFrame#

The reference frame that is fixed relative to the vessel, and orientated with the velocity vector of the vessel relative to the surface of the body being orbited.

The origin is at the center of mass of the vessel.
The axes rotate with the vessel’s velocity vector.
The y-axis points in the direction of the vessel’s velocity vector, relative to the surface of the body being orbited.
The z-axis is in the plane of the astronomical horizon.
The x-axis is orthogonal to the other two axes.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.ReferenceFrame

../../../_images/vessel-surface-velocity.png — Vessel surface velocity reference frame origin and axes#

position(reference_frame)#

The position of the center of mass of the vessel, in the given reference frame.

Parameters:: reference_frame (SpaceCenter.ReferenceFrame) – The reference frame that the returned position vector is in.
Returns:: The position as a vector.
Return type:: Tuple

bounding_box(reference_frame)#

The axis-aligned bounding box of the vessel in the given reference frame.

Parameters:: reference_frame (SpaceCenter.ReferenceFrame) – The reference frame that the returned position vectors are in.
Returns:: The positions of the minimum and maximum vertices of the box, as position vectors.
Return type:: Tuple

velocity(reference_frame)#

The velocity of the center of mass of the vessel, in the given reference frame.

Parameters:: reference_frame (SpaceCenter.ReferenceFrame) – The reference frame that the returned velocity vector is in.
Returns:: The velocity as a vector. The vector points in the direction of travel, and its magnitude is the speed of the body in meters per second.
Return type:: Tuple

rotation(reference_frame)#

The rotation of the vessel, in the given reference frame.

Parameters:: reference_frame (SpaceCenter.ReferenceFrame) – The reference frame that the returned rotation is in.
Returns:: The rotation as a quaternion of the form \((x, y, z, w)\).
Return type:: Tuple

direction(reference_frame)#

The direction in which the vessel is pointing, in the given reference frame.

Parameters:: reference_frame (SpaceCenter.ReferenceFrame) – The reference frame that the returned direction is in.
Returns:: The direction as a unit vector.
Return type:: Tuple

angular_velocity(reference_frame)#

The angular velocity of the vessel, in the given reference frame.

Parameters:: reference_frame (SpaceCenter.ReferenceFrame) – The reference frame the returned angular velocity is in.
Returns:: The angular velocity as a vector. The magnitude of the vector is the rotational speed of the vessel, in radians per second. The direction of the vector indicates the axis of rotation, using the right-hand rule.
Return type:: Tuple

class SpaceCenter.VesselType#

The type of a vessel. See SpaceCenter.Vessel.type.

base#: Base.

debris#: Debris.

lander#: Lander.

plane#: Plane.

probe#: Probe.

relay#: Relay.

rover#: Rover.

ship#: Ship.

station#: Station.

space_object#: SpaceObject.

unknown#: Unknown.

eva#: EVA.

flag#: Flag.

deployed_science_controller#: DeployedScienceController.

deployed_science_part#: DeploedSciencePart.

dropped_part#: DroppedPart.

deployed_ground_part#: DeployedGroundPart.

class SpaceCenter.VesselSituation#

The situation a vessel is in. See SpaceCenter.Vessel.situation.

docked#: Vessel is docked to another.

escaping#: Escaping.

flying#: Vessel is flying through an atmosphere.

landed#: Vessel is landed on the surface of a body.

orbiting#: Vessel is orbiting a body.

pre_launch#: Vessel is awaiting launch.

splashed#: Vessel has splashed down in an ocean.

sub_orbital#: Vessel is on a sub-orbital trajectory.

class SpaceCenter.CrewMember#

Represents crew in a vessel. Can be obtained using SpaceCenter.Vessel.crew.

name: string#

The crew members name.

Attribute:: Can be read or written
Return type:: string

type: SpaceCenter.CrewMemberType#

The type of crew member.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.CrewMemberType

on_mission: boolean#

Whether the crew member is on a mission.

Attribute:: Read-only, cannot be set
Return type:: boolean

courage: number#

The crew members courage.

Attribute:: Can be read or written
Return type:: number

stupidity: number#

The crew members stupidity.

Attribute:: Can be read or written
Return type:: number

experience: number#

The crew members experience.

Attribute:: Can be read or written
Return type:: number

badass: boolean#

Whether the crew member is a badass.

Attribute:: Can be read or written
Return type:: boolean

veteran: boolean#

Whether the crew member is a veteran.

Attribute:: Can be read or written
Return type:: boolean

trait: string#

The crew member’s job.

Attribute:: Read-only, cannot be set
Return type:: string

gender: SpaceCenter.CrewMemberGender#

The crew member’s gender.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.CrewMemberGender

roster_status: SpaceCenter.RosterStatus#

The crew member’s current roster status.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.RosterStatus

part: SpaceCenter.Part#

The part containing the crew member. Returns nil if the crew member is not occupying a part, or the vessel containing the part is not loaded.

Attribute:: Read-only, cannot be set
Return type:: SpaceCenter.Part

suit_type: SpaceCenter.SuitType#

The crew member’s suit type.

Attribute:: Can be read or written
Return type:: SpaceCenter.SuitType

career_log_flights: List#

The flight IDs for each entry in the career flight log.

Attribute:: Read-only, cannot be set
Return type:: List

career_log_types: List#

The type for each entry in the career flight log.

Attribute:: Read-only, cannot be set
Return type:: List

career_log_targets: List#

The body name for each entry in the career flight log.

Attribute:: Read-only, cannot be set
Return type:: List

class SpaceCenter.CrewMemberType#

The type of a crew member. See SpaceCenter.CrewMember.type.

applicant#: An applicant for crew.

crew#: Rocket crew.

tourist#: A tourist.

unowned#: An unowned crew member.

class SpaceCenter.CrewMemberGender#

A crew member’s gender. See SpaceCenter.CrewMember.gender.

male#: Male.

female#: Female.

class SpaceCenter.RosterStatus#

A crew member’s roster status. See SpaceCenter.CrewMember.roster_status.

available#: Available.

assigned#: Assigned.

dead#: Dead.

missing#: Missing.

class SpaceCenter.SuitType#

A crew member’s suit type. See SpaceCenter.CrewMember.suit_type.

default#: Default.

vintage#: Vintage.

future#: Future.

slim#: Slim.