.. default-domain:: c
.. highlight:: c


Control
=======


.. type:: krpc_SpaceCenter_Control_t

   Used to manipulate the controls of a vessel. This includes adjusting the
   throttle, enabling/disabling systems such as SAS and RCS, or altering the
   direction in which the vessel is pointing.
   Obtained by calling :func:`krpc_SpaceCenter_Vessel_Control`.

   .. note::

      Control inputs (pitch, yaw, roll, translation, wheel throttle, wheel steering
      and the custom axes) are zeroed when all clients that have set one or more of
      these inputs are no longer connected. The throttle is an exception: it keeps
      its value when clients disconnect.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Source(krpc_connection_t connection, krpc_SpaceCenter_ControlSource_t * result)

      The source of the vessels control, for example by a kerbal or a probe core.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_State(krpc_connection_t connection, krpc_SpaceCenter_ControlState_t * result)

      The control state of the vessel.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_SAS(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_SAS(bool value)

      The state of SAS.

      :Game Scenes: Flight


      .. note::

         Equivalent to :func:`krpc_SpaceCenter_AutoPilot_SAS`.
         Throws an exception if set to ``true`` while the auto-pilot is engaged, as the
         auto-pilot holds SAS off for as long as it is flying the vessel.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_SASMode(krpc_connection_t connection, krpc_SpaceCenter_SASMode_t * result)
   .. function:: void krpc_SpaceCenter_Control_set_SASMode(krpc_SpaceCenter_SASMode_t value)

      The current :func:`krpc_SpaceCenter_Control_SASMode`.
      These modes are equivalent to the mode buttons to
      the left of the navball that appear when SAS is enabled.

      :Game Scenes: Flight


      .. note::

         Equivalent to :func:`krpc_SpaceCenter_AutoPilot_SASMode`

   .. function:: krpc_error_t krpc_SpaceCenter_Control_SpeedMode(krpc_connection_t connection, krpc_SpaceCenter_SpeedMode_t * result)
   .. function:: void krpc_SpaceCenter_Control_set_SpeedMode(krpc_SpaceCenter_SpeedMode_t value)

      The current :func:`krpc_SpaceCenter_Control_SpeedMode` of the navball.
      This is the mode displayed next to the speed at the top of the navball.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_EngineGimbals(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_EngineGimbals(bool value)

      Returns whether all gimballed engines on the vessel have gimbal enabled,
      and sets the gimbal enabled state of all gimballed engines.
      See :func:`krpc_SpaceCenter_Engine_GimbalLocked`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_ThrustReversers(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_ThrustReversers(bool value)

      Returns whether all engines with a thrust reverser on the vessel have
      their thrust reverser engaged, and sets the thrust reverser state of all
      such engines.
      See :func:`krpc_SpaceCenter_Engine_ThrustReversed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_AeroSurfaces(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_AeroSurfaces(bool value)

      Returns whether all control surfaces on the vessel have pitch, yaw and roll enabled,
      and sets the pitch, yaw and roll enabled state of all control surfaces.
      See :func:`krpc_SpaceCenter_ControlSurface_PitchEnabled`,
      :func:`krpc_SpaceCenter_ControlSurface_YawEnabled` and
      :func:`krpc_SpaceCenter_ControlSurface_RollEnabled`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_RCS(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_RCS(bool value)

      The state of RCS.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_ReactionWheels(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_ReactionWheels(bool value)

      Returns whether all reactive wheels on the vessel are active,
      and sets the active state of all reaction wheels.
      See :func:`krpc_SpaceCenter_ReactionWheel_Active`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Gear(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Gear(bool value)

      The state of the landing gear/legs.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Legs(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Legs(bool value)

      Returns whether all landing legs on the vessel are deployed,
      and sets the deployment state of all landing legs.
      Does not include wheels (for example landing gear).
      See :func:`krpc_SpaceCenter_Leg_Deployed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Wheels(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Wheels(bool value)

      Returns whether all wheels on the vessel are deployed,
      and sets the deployment state of all wheels.
      Does not include landing legs.
      See :func:`krpc_SpaceCenter_Wheel_Deployed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Lights(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Lights(bool value)

      The state of the lights.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Brakes(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Brakes(bool value)

      The state of the wheel brakes.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Antennas(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Antennas(bool value)

      Returns whether all antennas on the vessel are deployed,
      and sets the deployment state of all antennas.
      See :func:`krpc_SpaceCenter_Antenna_Deployed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_CargoBays(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_CargoBays(bool value)

      Returns whether any of the cargo bays on the vessel are open,
      and sets the open state of all cargo bays.
      See :func:`krpc_SpaceCenter_CargoBay_Open`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Intakes(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Intakes(bool value)

      Returns whether all of the air intakes on the vessel are open,
      and sets the open state of all air intakes.
      See :func:`krpc_SpaceCenter_Intake_Open`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Parachutes(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Parachutes(bool value)

      Returns whether all parachutes on the vessel are deployed,
      and sets the deployment state of all parachutes.
      Cannot be set to ``false``.
      See :func:`krpc_SpaceCenter_Parachute_Deployed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Radiators(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Radiators(bool value)

      Returns whether all radiators on the vessel are deployed,
      and sets the deployment state of all radiators.
      See :func:`krpc_SpaceCenter_Radiator_Deployed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_ResourceHarvesters(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_ResourceHarvesters(bool value)

      Returns whether all of the resource harvesters on the vessel are deployed,
      and sets the deployment state of all resource harvesters.
      See :func:`krpc_SpaceCenter_ResourceHarvester_Deployed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_ResourceHarvestersActive(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_ResourceHarvestersActive(bool value)

      Returns whether any of the resource harvesters on the vessel are active,
      and sets the active state of all resource harvesters.
      See :func:`krpc_SpaceCenter_ResourceHarvester_Active`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_SolarPanels(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_SolarPanels(bool value)

      Returns whether all solar panels on the vessel are deployed,
      and sets the deployment state of all solar panels.
      See :func:`krpc_SpaceCenter_SolarPanel_Deployed`.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Abort(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_Abort(bool value)

      The state of the abort action group.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Throttle(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_Throttle(float value)

      The state of the throttle. A value between 0 and 1.
      Unlike the other control inputs, the throttle is not zeroed when the
      clients that set it disconnect.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_InputMode(krpc_connection_t connection, krpc_SpaceCenter_ControlInputMode_t * result)
   .. function:: void krpc_SpaceCenter_Control_set_InputMode(krpc_SpaceCenter_ControlInputMode_t value)

      Sets the behavior of the pitch, yaw, roll and translation control inputs.
      When set to additive, these inputs are added to the vessels current inputs.
      This mode is the default.
      When set to override, these inputs (if non-zero) override the vessels inputs.
      This mode prevents keyboard control, or SAS, from interfering with the controls when
      they are set.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Pitch(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_Pitch(float value)

      The state of the pitch control.
      A value between -1 and 1.
      Equivalent to the w and s keys.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Yaw(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_Yaw(float value)

      The state of the yaw control.
      A value between -1 and 1.
      Equivalent to the a and d keys.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Roll(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_Roll(float value)

      The state of the roll control.
      A value between -1 and 1.
      Equivalent to the q and e keys.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_PitchTrim(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_PitchTrim(float value)

      The state of the pitch trim.
      A value between -1 and 1.
      Equivalent to the Alt+W and Alt+S keys.
      This is a persistent trim that remains latched until changed or reset,
      and can only be accessed for the active vessel.
      Unlike the pitch, yaw and roll control inputs, the trim is not cleared
      when clients disconnect.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_YawTrim(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_YawTrim(float value)

      The state of the yaw trim.
      A value between -1 and 1.
      Equivalent to the Alt+A and Alt+D keys.
      This is a persistent trim that remains latched until changed or reset,
      and can only be accessed for the active vessel.
      Unlike the pitch, yaw and roll control inputs, the trim is not cleared
      when clients disconnect.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_RollTrim(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_RollTrim(float value)

      The state of the roll trim.
      A value between -1 and 1.
      Equivalent to the Alt+Q and Alt+E keys.
      This is a persistent trim that remains latched until changed or reset,
      and can only be accessed for the active vessel.
      Unlike the pitch, yaw and roll control inputs, the trim is not cleared
      when clients disconnect.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Forward(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_Forward(float value)

      The state of the forward translational control.
      A value between -1 and 1.
      Equivalent to the h and n keys.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Up(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_Up(float value)

      The state of the up translational control.
      A value between -1 and 1.
      Equivalent to the i and k keys.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Right(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_Right(float value)

      The state of the right translational control.
      A value between -1 and 1.
      Equivalent to the j and l keys.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_WheelThrottle(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_WheelThrottle(float value)

      The state of the wheel throttle.
      A value between -1 and 1.
      A value of 1 rotates the wheels forwards, a value of -1 rotates
      the wheels backwards.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_WheelSteering(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_WheelSteering(float value)

      The state of the wheel steering.
      A value between -1 and 1.
      A value of 1 steers to the left, and a value of -1 steers to the right.

      :Game Scenes: Flight


      .. note::

         The getter returns the input currently applied to the vessel, which
         combines the input set by kRPC with any keyboard, SAS and trim input.
         It refreshes one physics tick after a set, so a read immediately after
         a set returns the previously applied value rather than the value just set.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_CustomAxis01(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_CustomAxis01(float value)

      The state of CustomAxis01.
      A value between -1 and 1.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_CustomAxis02(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_CustomAxis02(float value)

      The state of CustomAxis02.
      A value between -1 and 1.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_CustomAxis03(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_CustomAxis03(float value)

      The state of CustomAxis03.
      A value between -1 and 1.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_CustomAxis04(krpc_connection_t connection, float * result)
   .. function:: void krpc_SpaceCenter_Control_set_CustomAxis04(float value)

      The state of CustomAxis04.
      A value between -1 and 1.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_CurrentStage(krpc_connection_t connection, int32_t * result)

      The current stage of the vessel. Corresponds to the stage number in
      the in-game UI.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_ActivateNextStage(krpc_connection_t connection, krpc_list_object_t * result)

      Activates the next stage. Equivalent to pressing the space bar in-game.


      :returns: A list of vessel objects that are jettisoned from the active vessel.
      :Game Scenes: Flight


      .. note::

         When called, the active vessel may change. It is therefore possible that,
         after calling this function, the object(s) returned by previous call(s) to
         :func:`krpc_SpaceCenter_ActiveVessel` no longer refer to the active vessel.
         Throws an exception if staging is locked.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_StageLock(krpc_connection_t connection, bool * result)
   .. function:: void krpc_SpaceCenter_Control_set_StageLock(bool value)

      Whether staging is locked on the vessel.

      :Game Scenes: Flight


      .. note::

         This is equivalent to locking the staging using Alt+L

   .. function:: krpc_error_t krpc_SpaceCenter_Control_GetActionGroup(krpc_connection_t connection, bool * result, uint32_t group)

      Returns ``true`` if the given action group is enabled.

      :Parameters:

       * **group** -- A number between 0 and 9 inclusive, or between 0 and 250 inclusive when the `Extended Action Groups mod <https://forum.kerbalspaceprogram.com/index.php?/topic/67235-122dec1016-action-groups-extended-250-action-groups-in-flight-editing-now-kosremotetech/>`_ is installed.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_SetActionGroup(krpc_connection_t connection, uint32_t group, bool state)

      Sets the state of the given action group.

      :Parameters:

       * **group** -- A number between 0 and 9 inclusive, or between 0 and 250 inclusive when the `Extended Action Groups mod <https://forum.kerbalspaceprogram.com/index.php?/topic/67235-122dec1016-action-groups-extended-250-action-groups-in-flight-editing-now-kosremotetech/>`_ is installed.


      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_ToggleActionGroup(krpc_connection_t connection, uint32_t group)

      Toggles the state of the given action group.

      :Parameters:

       * **group** -- A number between 0 and 9 inclusive, or between 0 and 250 inclusive when the `Extended Action Groups mod <https://forum.kerbalspaceprogram.com/index.php?/topic/67235-122dec1016-action-groups-extended-250-action-groups-in-flight-editing-now-kosremotetech/>`_ is installed.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_GetActionGroupActions(krpc_connection_t connection, krpc_list_object_t * result, uint32_t group)

      Returns a list of all the part actions that are assigned to the given action group.
      Each entry identifies the part, the part module, and the action's name and identifier.
      Returns an empty list if no actions are assigned to the group.

      :Parameters:

       * **group** -- A number between 0 and 9 inclusive, or between 0 and 250 inclusive when the `Extended Action Groups mod <https://forum.kerbalspaceprogram.com/index.php?/topic/67235-122dec1016-action-groups-extended-250-action-groups-in-flight-editing-now-kosremotetech/>`_ is installed.

      :Game Scenes: Flight


      .. note::

         For stock action groups, the assignments are read from each part action directly.
         When the Extended Action Groups mod is installed, the assignments are queried from
         the mod instead, so that actions assigned to its additional groups are included.

   .. function:: krpc_error_t krpc_SpaceCenter_Control_AddNode(krpc_connection_t connection, krpc_SpaceCenter_Node_t * result, double ut, float prograde, float normal, float radial)

      Creates a maneuver node at the given universal time, and returns a
      :type:`krpc_SpaceCenter_Node_t` object that can be used to modify it.
      Optionally sets the magnitude of the delta-v for the maneuver node
      in the prograde, normal and radial directions.

      :Parameters:

       * **ut** -- Universal time of the maneuver node.
       * **prograde** -- Delta-v in the prograde direction.
       * **normal** -- Delta-v in the normal direction.
       * **radial** -- Delta-v in the radial direction.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_Nodes(krpc_connection_t connection, krpc_list_object_t * result)

      Returns a list of all existing maneuver nodes, ordered by time from first to last.

      :Game Scenes: Flight

   .. function:: krpc_error_t krpc_SpaceCenter_Control_RemoveNodes(krpc_connection_t connection)

      Remove all maneuver nodes.


      :Game Scenes: Flight



.. type:: krpc_SpaceCenter_ActionGroupAction_t

   An action, belonging to a part module, that is assigned to an action group.
   Obtained by calling :func:`krpc_SpaceCenter_Control_GetActionGroupActions`.

   .. function:: krpc_error_t krpc_SpaceCenter_ActionGroupAction_Part(krpc_connection_t connection, krpc_SpaceCenter_Part_t * result)

      The part that the action acts on.

   

   .. function:: krpc_error_t krpc_SpaceCenter_ActionGroupAction_Module(krpc_connection_t connection, krpc_SpaceCenter_Module_t * result)

      The part module that the action belongs to. Returns ``nullptr`` for a
      part-level action that is not associated with a module. This only occurs when
      the Extended Action Groups mod is installed, as it can assign actions defined
      directly on a part, rather than on one of its modules, to an action group.

   

   .. function:: krpc_error_t krpc_SpaceCenter_ActionGroupAction_Name(krpc_connection_t connection, char * * result)

      The human-readable name of the action, as shown in the action group editor.

   

   .. function:: krpc_error_t krpc_SpaceCenter_ActionGroupAction_Id(krpc_connection_t connection, char * * result)

      The non-localized identifier for the action.

   



.. type:: krpc_SpaceCenter_ControlState_t

   The control state of a vessel.
   See :func:`krpc_SpaceCenter_Control_State`.


   .. macro:: KRPC_SPACECENTER_CONTROLSTATE_FULL

      Full controllable.


   .. macro:: KRPC_SPACECENTER_CONTROLSTATE_PARTIAL

      Partially controllable.


   .. macro:: KRPC_SPACECENTER_CONTROLSTATE_NONE

      Not controllable.



.. type:: krpc_SpaceCenter_ControlSource_t

   The control source of a vessel.
   See :func:`krpc_SpaceCenter_Control_Source`.


   .. macro:: KRPC_SPACECENTER_CONTROLSOURCE_KERBAL

      Vessel is controlled by a Kerbal.


   .. macro:: KRPC_SPACECENTER_CONTROLSOURCE_PROBE

      Vessel is controlled by a probe core.


   .. macro:: KRPC_SPACECENTER_CONTROLSOURCE_NONE

      Vessel is not controlled.



.. type:: krpc_SpaceCenter_SASMode_t

   The behavior of the SAS auto-pilot. See :func:`krpc_SpaceCenter_AutoPilot_SASMode`.


   .. macro:: KRPC_SPACECENTER_SASMODE_STABILITYASSIST

      Stability assist mode. Dampen out any rotation.


   .. macro:: KRPC_SPACECENTER_SASMODE_MANEUVER

      Point in the burn direction of the next maneuver node.


   .. macro:: KRPC_SPACECENTER_SASMODE_PROGRADE

      Point in the prograde direction.


   .. macro:: KRPC_SPACECENTER_SASMODE_RETROGRADE

      Point in the retrograde direction.


   .. macro:: KRPC_SPACECENTER_SASMODE_NORMAL

      Point in the orbit normal direction.


   .. macro:: KRPC_SPACECENTER_SASMODE_ANTINORMAL

      Point in the orbit anti-normal direction.


   .. macro:: KRPC_SPACECENTER_SASMODE_RADIAL

      Point in the orbit radial direction.


   .. macro:: KRPC_SPACECENTER_SASMODE_ANTIRADIAL

      Point in the orbit anti-radial direction.


   .. macro:: KRPC_SPACECENTER_SASMODE_TARGET

      Point in the direction of the current target.


   .. macro:: KRPC_SPACECENTER_SASMODE_ANTITARGET

      Point away from the current target.



.. type:: krpc_SpaceCenter_SpeedMode_t

   The mode of the speed reported in the navball.
   See :func:`krpc_SpaceCenter_Control_SpeedMode`.


   .. macro:: KRPC_SPACECENTER_SPEEDMODE_ORBIT

      Speed is relative to the vessel's orbit.


   .. macro:: KRPC_SPACECENTER_SPEEDMODE_SURFACE

      Speed is relative to the surface of the body being orbited.


   .. macro:: KRPC_SPACECENTER_SPEEDMODE_TARGET

      Speed is relative to the current target.



.. type:: krpc_SpaceCenter_ControlInputMode_t

   See :func:`krpc_SpaceCenter_Control_InputMode`.


   .. macro:: KRPC_SPACECENTER_CONTROLINPUTMODE_ADDITIVE

      Control inputs are added to the vessels current control inputs.


   .. macro:: KRPC_SPACECENTER_CONTROLINPUTMODE_OVERRIDE

      Control inputs (when they are non-zero) override the vessels current control inputs.